Complete care and cleaning kit for sex dolls

Cleaning instructions:

1. Wet the brush and apply a gentle, alcohol and silicone-free soap.
2. Carefully insert the brush into the orifice and gently scrub to clean thoroughly.

Rinsing instructions:

1. Squeeze the douche bulb while in water to fill it, then insert it into the orifice and squeeze to release the water for a deep clean.
2. Repeat until all soap is removed.

Drying instructions:

1. Insert the moisture-absorbing stick into the rinsed orifice until it fully absorbs the moisture.
2. Remove and air dry. You can reuse the stick several times.

Using the stain remover cream:

1. Apply a thick layer of cream over the stain using a brush.
2. Leave it for 12 hours; the cream will harden after a few hours.
3. Wearing gloves, rinse off with soapy water to completely remove the cream.
4. Dry the area properly and wait an additional 12 hours as the product continues to work.
5. Repeat the application process until the stain is completely removed.

Using the USB hole warmer:

1. Plug in the heating element and place it in the desired orifice.
2. Wait a few minutes for it to reach the correct temperature.
3. Remove it from the orifice and enjoy your sex toy immediately.